Labkotec OilSET-1000 - User Manual

Labkotec UK Ltd
Shentonfield Road
Manchester
M22 4SD
ENGLAND
Tel: 0844 3350 477 1.10.2008
Fax: 0161 428 1179 D15399_e
E-mail: info@labkotec.co.uk
Internet: www.labkotec.co.uk
1/10
Copyright © 2008 Labkotec Oy We reserve the right for changes without notice
OilSET-1000
Oil Separator Alarm Device
Installation and Operating Instructions

Summary

2 INSTALLATION

2.1 OilSET-1000 control unit

Details wall mounting, enclosure tightening, and connector plate installation for the control unit.

2.2 SET DM;3 probe

Explains the installation depth and alarm conditions for the SET DM/3 probe.

3 OPERATION AND SETTINGS

Functionality test

3.1 Operation

Explains Normal mode, Oil alarm, Fault alarm, and how to reset an alarm.

TEST FUNCTION

4 TROUBLE-SHOOTING

Problem: MAINS LED indicator is off

Problem: No alarm when probe in oil or air, or the alarm will not go off

Problem: FAULT LED indicator is on

5 REPAIR AND SERVICE

6 SAFETY INSTRUCTIONS

Installation location for control unit and probes

Prohibits control unit installation in explosive atmospheres, but allows probes in zones 0, 1, 2.

Mains switch requirement

Advises installing a two-pole mains switch for maintenance and service operations.

Labkotec OilSET-1000 Specifications

General

Brand	Labkotec
Model	OilSET-1000
Category	Measuring Instruments
Language	English