To Next PageTo Next Page
Need help?Do you have a question about the LaboGene SCANVAC CoolSafe 95-15 PRO Superior XL and is the answer not in the manual?
General| Model | CoolSafe 95-15 PRO Superior XL |
|---|---|
| Cooling Capacity/Volume | 15 L |
| Voltage | 230 V |
| Frequency | 50/60 Hz |
| Condenser Material | Stainless steel |
Read this manual to understand safe and effective use. Comments are welcome.
Details overload protection, circuit breakers, and precautions for cold surfaces.
Ensure correct mains supply, adequate air circulation, and locked castors for placement.
Connect a two-stage vacuum pump and position it using the shelf support.
Position shelves inside the condenser, connect cables, and adjust for sample loading.
Connect the mains cable at the rear and use the front panel ON/OFF switch.
Details manual, automatic, de-ice, and stop modes with input parameters and sequence.
Enables full programming and control via computer/laptop with saving in Excel format.
Check ice condenser, valves, pump oil, and filter before starting the unit.
Guides automatic and manual settings for pre-freezing in 5 steps and freeze drying in 10 steps.
Details electric de-icing option for releasing the ice core.
Procedure for stopping the vacuum pump, minimizing condensation, and running recommendations.
Routine cleaning of the air-cooled condenser and cooling grill.
Checking oil, changing oil, draining filter, and cleaning filter inserts.
Guidelines for cleaning acrylic, stainless steel, and the condenser.
Step-by-step guide to check for vacuum leaks from the pump to the chamber.
Advice on sample container selection, vacuum pump maintenance, seals, and pre-operation.
List of articles, books, and research papers on freeze drying.
Table showing vapor pressure of ice in hPa for temperatures from -98 to 0°C.
