Need help?Do you have a question about the Labounty MSD Series and is the answer not in the manual?
General| Power Source | Hydraulic |
|---|---|
| Weight | Varies by model |
| Operating Pressure | Varies by model |
| Flow Rate | Varies by model |
| Rotation | 360-degree continuous rotation |
Imminent hazard resulting in death or serious injury.
Potential hazard resulting in death or serious injury.
Mandatory wearing of personal protective equipment.
Essential preparations, safety devices, and general rules for safe shear operation.
Lists daily, 80-hour, 1500-hour, and 2000-hour inspection requirements.
Provides torque specifications for all fasteners and bolt inspection guidelines.
Safety precautions and steps for removing shear blades.
Procedure for measuring and adjusting blade gaps using feeler gauges and shims.
How to measure and shim gaps for upper and lower secondary blades.
How to measure and shim gaps for upper and lower primary blades.
Procedure for the first rotation of shear blades (Pitch Rotation).
Procedure for the second rotation of shear blades (Roll Rotation).
Procedure for the third rotation, similar to the first.
Procedure for replacing all blades and piercing tips.
Detailed steps for performing jaw build-up welding.
Steps for applying hardsurfacing material to the jaws.
How to adjust the slide screw to ensure proper jaw alignment.
How to adjust the speed valve for optimal jaw closing speed.
To Next Page
