Step 04: Touch the Temp. Text box, input 150 via the digital key. Then touch Time text box to input 60 which
means holding temperature at 150C for 60min.
Step 05: Touch the Temp. Text box, input 150 via the digital key. Then touch Time text box to input -1 which
means stop the program after step 04.
Touch SAVE to save the method.
A. Touch Method Check to view and check the heating graph.
B. Touch Soil then Method2 to check if the program heating curve you just set is correct. Touch Save to quit
the interface and select this program.
C. In home page, touch RUN to start the selected program.
D. When finish all the steps, the unit stops and buzzer screaming. Touch any key to stop the buzzer.
To Next Page
Loading...