Need help?Do you have a question about the Labtech Smart H150-1500NS and is the answer not in the manual?
Overview of the controller panel and its keys, including buttons for setpoint, shift, decrease, increase, and indicators for alarm, cooling, low liquid level, and working state.
Identifies key components visible on the front panel of the unit, such as the power switch, control panel, pressure gauge, and air flow vents.
Emphasizes reading and understanding the manual for safe operation, warning against improper use leading to damages or injuries.
Covers electrical safety, including correct voltage usage, wire checks, and prohibiting disassembly to prevent electrical hazards.
Addresses fire hazards with flammable reagents, advising to keep the instrument away from ignition sources and high temperatures.
Details safety measures for chemical solvents, stressing personal safety, waste barrel checks, and vent fan conditions.
Lists common causes and checks for when the unit fails to start, including power cord, circuit breaker, and voltage.
Provides troubleshooting steps for circulation issues, checking water level, cooling line restrictions, pump strainer, and relief valve.
Offers solutions for temperature control problems, such as verifying setpoint, heat load, ventilation, and condenser cleanliness.
To Next Page
General