Need help?Do you have a question about the Labtech VP30 and is the answer not in the manual?
General| Brand | Labtech |
|---|---|
| Model | VP30 |
| Category | Water Pump |
| Language | English |
LabTech develops innovative Vacuum Pump systems for high precision vacuum conditions.
Products comply with EC directives for Electromagnetic Compatibility and Low Voltage.
Product complies with EU Waste Electrical & Electronic Equipment (WEEE) Directive 2011/65/EC.
Provides contact details for LabTech Technical Support, Application Department, and Sales.
Read manual carefully before use; non-observance may cause damage/injury.
Use within rated voltage, check wires, do not disassemble. Ensure proper grounding.
Keep away from ignition sources. Check for solvent leaks if pungent smell is detected.
Be aware of peroxide/flammable gas formation from solvents. Avoid explosion risks.
Understand all safety precautions before operating. Contact Customer Service for questions.
Details technical specifications like voltage, power, pumping speed, dimensions, and weight for each model.
Specifies environmental conditions like temperature, humidity, altitude, and placement guidelines.
Provides physical dimensions (height, width, length) and weight for each vacuum pump model.
Lists available voltage, frequency, IP degree, and power consumption for each unit model.
Step-by-step guide to connect the instrument using a rubber pipe and power cord.
Instruction to switch the unit on after all connections are made securely.
Avoid aspirating solvent and liquid into the pump to prevent damage.
Ensure at least 5 cm of free space around the vacuum pump for ventilation.
Check power cord and ensure system pressure is not excessively negative.
Check for inhaled liquid/vapors/particles; dry or blow out impurities from the pump.
To Next Page