VP20 Plus
Installation
Please check all parts and accessories before installation and set up according to the following.
Site Requirements
Ambient Temperature Range: 10°C to 40°C (50°F to 104°F)
Relative Humidity Range : 10% to 80% (non-condensing)
Operating Altitude: Sea Level to 8000 feet (2438 meters)
Never place the unit in a location where excessive heat, moisture, or corrosive materials are present.
Please put the equipment on a firm, strong bench. Avoid the resonance from the bench. This will decrease the
risk of vibrations and noise.
Dimensions and Weights
To Next Page
Loading...