EasyManua.ls Logo

Lacanche Classic User Manual

Lacanche Classic
6 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Unit 3 Albion Close, Newtown Business Park, Poole Dorset.
BH12 3LL Tel: 01202 733 011 Fax: 01202733499
Email info@fdef.co.uk Web www.fdef.co.uk
For Lacanche Classic & Modern Cluny
IMPORTANT INFORMATION FOR CUSTOMERS TO READ
Please read before delivery/installation of your cooker
Thank you for purchasing a Lacanche Cooker. To ensure that delivery/installation of your
cooker runs smoothly it is essential that you read the following carefully and adhere to all
specifications.
Please feel free to contact us regarding any aspect of the purchase of your Lacanche cooker.
The sales office telephone number is 01202 733011.
Type of Gas
Please check that the gas supply required (Natural/LPG) is correctly stated on our Order
Acknowledgement.
In the UK
In the UK the cooker must be installed by a Gas Safe registered engineer.
A suitable diameter copper pipe is required to supply the appliance with a constant 20
millibars of natural or 37 millibars of propane gas. The last metre of the copper pipe should
step to a 15mm diameter. The gas pipe should terminate with a plug-in female bayonet
pointing downwards. Although a 900mm hose can be used, a 1250mm hose will allow slightly
more flexibility in the positioning of the bayonet and make moving the cooker easier. The
hose should be fitted so that both inlet and outlet connections are vertical, so that the hose
hangs downwards in a ‘U’ shape.
For Natural Gas the flexible hose must be in accordance with B.S.669.
For LP Gas it should be capable of 50mbar pressure, 70C temperature rise and carry a red
stripe, band or label. If in doubt contact your supplier.
Safety Requirements and Regulations
This cooker must be installed in accordance with the relevant instructions in the Lacanche
Manual, with the relevant national and local regulations, and with the local gas and electricity
supply companies’ requirements.
Before installation, make sure that the cooker is suitable for your gas type and supply voltage.
See the data badge on range
The appliance must be installed in accordance with the regulations in force and only in a well-
ventilated space.
Read the instructions before installing or using this appliance.
In your own interest and that of safety, it is law that all gas appliances be installed by
competent persons.
Failure to install the appliance correctly could invalidate any warranty or liability claims and
lead to prosecution.
In the UK the cooker must be installed in accordance with:
All relevant British Standards / Codes of Practice, in particular BS 5440 Part 2.
For Natural Gas – BS 6172 and BS 6891.
For LP Gas – BS 5482-1 (when the installation is in a permanent dwelling), BS 5482-2 (when
the installation is in a caravan or other non- permanent dwelling), or BS 5482-3 (when the
installation is in a boat).
The Gas Safety (Installation and Use) regulations.
The relevant Building / IEE regulations.
Question and Answer IconNeed help?

Do you have a question about the Lacanche Classic and is the answer not in the manual?

Lacanche Classic Specifications

General IconGeneral
Fuel TypeGas, Electric, Dual Fuel
Hob TypeGas or Induction
Main Oven CapacityVaries by model
Secondary Oven CapacityVaries by model
DimensionsVaries by model
Hob ConfigurationVaries by model
Oven ConfigurationVaries by model
Hob MaterialStainless Steel, Enamel
MaterialStainless Steel, Enamel
WeightVaries by model
Color OptionsWide range of custom colors

Summary

Important Information for Customers

Gas Type Confirmation

Verify the required gas supply (Natural/LPG) is correctly stated on the order acknowledgement.

UK Gas Installation Requirements

Installation in the UK requires a Gas Safe engineer and specific copper pipe/hose configurations.

Safety and Regulatory Compliance

Ensure installation follows the manual, national/local regulations, and supply company requirements.

Ventilation Requirements

Room Air Supply Standards

Comply with BS 5440 Part 2: 2000 for room air supply and ventilation needs based on room volume.

Electrical Connection Specifications

Electrical Installation and Safety

Appliance must be earthed and connected by a qualified electrician with a double pole isolation switch.

Building In Instructions

Installation Clearances and Dimensions

Details required clearances around the appliance and for adjoining furniture for safe installation.

Delivery and Warranty Information

Delivery Inspection and Handling

Inspect cooker upon delivery, report damage within 24 hours, and do not lift by the hand rail.

Warranty Terms and Conditions

Understand the 3-year warranty coverage, exclusions (e.g., installation errors), and regional limitations.

Related product manuals