Need help?Do you have a question about the LACENANO Obelisk and is the answer not in the manual?
Check power supply output voltage polarity: positive tip, negative sleeve. Reversed polarity causes damage and voids warranty.
Operates between 4V and 8V. Exceeding this voltage shuts down the machine. Ensure correct voltage for consistent operation.
Raising input voltage over 10V will result in damage to the product and void the warranty.
Ensure proper connection and voltage between 4V-8V.
Over voltage protection engaged; lower the voltage.
Adjust machine settings or increase voltage.
Lower the voltage for consistent performance.
Raise the voltage for consistent performance.
To Next Page
General