To Next PageTo Next PageWhy does my LaCie Monitor say 'OUT OF RANGE'?
If the message 'OUT OF RANGE' is displayed on your LaCie Monitor (either the screen is blank or shows rough images), it means either the signal clock or resolution is too high, or the signal frequency is out of range. To resolve this, choose one of the supported modes.
What to do if LaCie Monitor image is unstable?
If your LaCie Monitor's image is unstable or unfocused, ensure the signal cable is completely attached to the computer. Use the OSD Image Adjust controls to focus and adjust the display by increasing or decreasing the fine total. Verify the compatibility and recommended signal timings between the monitor and your display card. If the text is garbled, change the video mode to non-interlace and use a 60Hz refresh rate.
What to do if there is no video on LaCie Monitor?
If there is no video on the screen of your LaCie Monitor, try turning the power button off and on again. Also, ensure that the computer is not in a power-saving mode by touching the keyboard or mouse.
How to fix display image size on LaCie Monitor?
If the display image on your LaCie Monitor is not sized properly, use the OSD Image Adjust controls to increase or decrease the Coarse total. Also, ensure that a supported mode has been selected on the display card or system being used.
Why does the power button on my LaCie Monitor not respond?
If the power button on your LaCie Monitor does not respond, unplug the power cord from the AC outlet to turn off and reset the monitor. Also, check the Vacation Switch on the left side of the monitor to ensure it is properly set.
What to do if LED on LaCie Monitor is not lit?
If the LED on your LaCie Monitor is not lit, ensure that the Power Switch is in the ON position and the power cord is properly connected.
How to fix image persistence on LaCie Monitor?
To alleviate image persistence on your LaCie Monitor, turn off the monitor for as long as the previous image was displayed. LaCie recommends displaying moving images and using a moving screen saver at regular intervals whenever the screen is idle, or turning off the monitor when not in use.
What to do if the LaCie 500 Monitor image is unstable?
If the image on your LaCie Monitor is unstable, unfocused, or swimming, make sure the signal cable is completely attached to the computer. Use the OSD Image Adjust controls to focus and adjust the display by increasing or decreasing the Fine setting. Verify the compatibility and recommended signal timings of both the monitor and your display card. If your text is garbled, switch the video mode to non-interlaced and use a 60Hz refresh rate.
How to adjust the display image size on LaCie Monitor?
If the display image on your LaCie Monitor isn't sized properly, use the OSD Image Adjust controls to increase or decrease the Coarse total. Ensure that a supported mode has been selected on the display card or system being used.
What to do if LaCie 500 power button does not respond?
If the power button on your LaCie Monitor doesn't respond, unplug the power cord of the monitor from the AC outlet to turn off and reset it. Also, check the Vacation Switch on the left side of the monitor to ensure it's properly set.
Key safety guidelines for operating and handling the monitor, including precautions against liquids, objects, and damage.
Explanation of LCD image persistence phenomenon and methods to alleviate it.
Guidance on monitor placement, posture, eye care, and adjustments for optimal user comfort and productivity.
Details on TCO'03 display requirements including ergonomics, energy, safety, emissions, and ecology.
Explanation of the monitor's energy saving capabilities and modes, including power consumption details.
Comprehensive list of technical parameters including display, resolution, pixel pitch, color, luminance, and connectivity.
Overview of the monitor's advanced features, including screen size, resolution, wide-gamut panel, and calibration.
Itemized list of all components included in the monitor's packaging, such as cables, stand, and software.
Instructions for connecting signal and power cables, managing them, and setting up the monitor stand.
Guide to adjusting the monitor's height, tilt, rotation, and swivel for optimal viewing.
Overview of OSD access, button functions, and basic menu navigation for common settings.
Detailed adjustments for image quality, color, brightness, contrast, gamma, and advanced features.
Configuration options for language, OSD position, screen saver, lock-out functions, and system information.
Procedure to set the minimum and maximum brightness levels for the automatic ambient light adjustment feature.
Checklist and solutions for common issues like no picture, power response, and signal problems.
Solutions for issues such as LED not lit, image persistence, out of range messages, unstable images, and no video.
Details on what information to provide when contacting support, including serial number and system configuration.
List of contact information and website links for LaCie technical support in various regions worldwide.
Details on the product warranty, conditions that void the warranty, and how to obtain service.
General