Need help?Do you have a question about the LaCie 5BIG THUNDERBOLT 2 and is the answer not in the manual?
Explains the Thunderbolt cable types and how to connect them to the computer and the LaCie 5big.
Guides the user through downloading and installing the LaCie RAID Manager software for storage management.
Details the steps for connecting the power supply to the LaCie 5big and a power outlet.
Explains how to use the front LED power button to turn the LaCie 5big on and off.
Provides conditions and preparation steps required before powering on the LaCie 5big Thunderbolt 2.
Describes the procedure for powering off the LaCie 5big hard drives to enter idle mode.
Details the steps for safely powering off and unplugging the entire LaCie 5big enclosure.
Explains how Thunderbolt 2 and first generation Thunderbolt devices can be daisy-chained together.
Lists the key functions of LaCie RAID Manager for configuring RAID, checking health, and troubleshooting.
Provides examples and summaries of available RAID modes and their minimum drive requirements.
Details the operation, capacity, and lack of data protection in RAID 0 configuration.
Explains RAID 1's data security, reduced performance, and halved capacity due to mirroring.
Describes RAID 5's data protection, performance, and capacity calculation, requiring a minimum of three drives.
Details RAID 6's ability to tolerate two drive failures with double parity, offering good protection with slightly reduced performance.
Explains RAID 10's combination of RAID 1 protection and RAID 0 performance for high IOPS and data protection.
Guides the user through the steps of removing a hard drive tray from the LaCie 5big enclosure.
To Next Page
General