LAE AT2-5 Series User Manual

Sensor type: NTC2K, 2000Ω @ 25°C
Range: -40÷120°C
Accuracy: ±0.3°C @ 25°C
Sheath: Ø6x29mm; TPE
Cable: 2 wires x 0.35mm
2
; -40÷120°C; TPE; points
Protection:
IP67
SN2B..P
Sensor type: NTC10K, 10000Ω @ 25°C
Range: -40÷120°C
Accuracy: ±0.3°C @ 25°C
Sheath: Ø6x29mm; TPE
Cable: 2 wires x 0.35mm
2
; -40÷120°C; TPE; points
Protection:
IP67
SN4B..P
Sensor type: KTY81-121, 990Ω @ 25°C
Range: -40÷105°C
Accuracy: ±1.5°C @ 25°C
Sheath: Ø6x34mm; TPE
Cable: 2 wires x 0.35mm
2
; -40÷105°C; TPE; connector or points
Protection:
IP67
ST1K..C/P
Sensor type: Capacitive
Output signal: 0÷1Vdc
Range: 0%÷100%r.H
Accuracy: ±5%r.H. (25%÷75%r.H.)
Sheath: Ø14x40mm
Protection: IP65 (electronics)
Operating temperature: 0÷75°C (sensor) / 0÷50°C (electronics)
Dimensions of the enclosure: 110x53x75mm (electronics)
Power supply: 12Vdc, 0.2W
HT2WAD
TemperaTure probes HumidiTy TransmiTTers
pressure TransmiTTer
Sensor type: Piezoresistive gauge
Output: 4÷20mA
Range: -0,5÷35,0 bar
Accuracy: max±1%FS (0÷50°C)
Sheath: Ø17x58 mm
Connections: mPm connector
Pressure port: 7/16”-20UNF male, steel AISI 316L
Protection: IP65
Ambient temperature: -40÷100°C
Power supply: 8÷32Vdc
PGT35

LAE AT2-5 Series Specifications

General

Brand	LAE
Model	AT2-5 Series
Category	Controller
Language	English