Need help?Do you have a question about the Laetus LT139830020 and is the answer not in the manual?
Describes the COSI 221 barcode reader and its connection to the evaluation unit.
Provides an overview of the functions available in the Service menu.
Details the specific functions and options within the Service menu.
Introduces the Setup menu tabs and navigation options.
Details the parameters and settings within the Setup 1 menu.
Details the parameters and settings within the Setup 2 menu.
Configuration options for gate, polarity, pulse width, and reading direction.
Displays product and sensor identification details.
How to set up the COSI 221 as a slave device in the ARGUS wt10 system.
Explains the function and activation of the "Variable" setting.
Overview of the Production menu and its tab cards for viewing production data.
Details the specific sections within the Production menu: Current Data, Fault Readings, etc.
Overview of administration data and options like identification and accounts.
Details the administration data fields and how to change device name and user language.
Explains how to set orientation parameters for tube filling applications.
General| Model | LT139830020 |
|---|---|
| Operating Voltage | 5 VDC |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -20°C to 60°C |
| Interface | USB |
| Supported Barcodes | 1D Barcodes |
| Resolution | 0.1 mm |
| Light Source | LED |
| Humidity | 5% to 95% (non-condensing) |
To Next Page