Need help?Do you have a question about the Lafalink LF-R500 and is the answer not in the manual?
General| Brand | Lafalink |
|---|---|
| Model | LF-R500 |
| Category | Wireless Router |
| Language | English |
Details RF radiation exposure compliance requirements for the device, including separation distances.
Provides a general introduction to the outdoor wireless CPE's capabilities and applications.
Lists the key technical specifications and functionalities of the wireless CPE.
Explains the function of each LED indicator on the LF-R500 device for status monitoring.
Details the physical ports and buttons available on the LF-R500 hardware.
Outlines the necessary software and hardware prerequisites for setting up and operating the device.
Specifies the optimal operating temperature and humidity conditions for the device.
Provides step-by-step instructions for physically connecting the LF-R500 to a network using PoE.
Guides users through initial configuration steps, including TCP/IP setup, after connecting the device.
Configures the device for internet access using PPPoE, requiring ISP credentials.
Configures the device for internet access using a static IP address provided by the ISP.
Configures the device for internet access using a dynamic IP address assigned by the ISP.
Details how to connect the CPE to another wireless network in Bridge Mode.
Configures PPPoE for WISP internet access, linking to ISP credentials.
Configures Static IP for WISP internet access using ISP-provided parameters.
Configures Dynamic IP for WISP internet access, obtaining parameters automatically from the ISP.
To Next Page