DUO2- user’s manual user’s manual - DUO2
45
46
3.3 DVB-T2
Select DVB-S2, then press ok key into the Scan Setup.
3.3.1 Country Setting
Press key to change the default country.
3.3.2 Channel No
Press key to change the channel number.
3.3.3 Frequency
Frequency of the current channel, Input the value by using the numeric keys.
3.3.4 Band width
Press key to change the bandwidth, we can select 5, 6, 7 or 8M
3.3.5 Mode
Press key to change the DVB standard, we have there types including T/T2/T+T2, you can select one you want.
3.3.6 Beep Tone
Press key to switch beep tone. If we open the beep tone, when we enter into the search screen, the beep of
lock alarm will open.
3.3.7 Antenna Setting
Press key to change the antenna power, we have there types including 5v/12V/17v, you can select one you want.
3.3.8 Antenna On/Off
Press key to power on or off the antenna
3.3.9 Quick Search
In the Channel Find interface, press OK key will enter into the quick search.
• Ch Scan: Press OK/red key to search current channel.
• Auto Scan : Press green key to auto search the current channel.
• Beep :Press orange key to open beep tone.
• Zoom : Press blue key to enlarge showing of the signal strength and quality.
To Next Page
Loading...