Lafayette EZ-Charge V2 User Manual

EZ-Charge V2
Mul-Channel Remote
FCC Compliance
This device complies with Part 15 of the FCC Rules. Operaon is subject to the following two condions
[1] This device may not cause harmful interface, and
[2] This device must accept any interference received, including interference that may cause undesired op-
eraon.
Package Contents
1 x 15 channel remote
1 x magnec holder including wall xing screws
1 x 3V CR2450 baery
For Motorizaon Technical Support call 877-548-0612
EZ-Charge Programming Instructions

Lafayette EZ-Charge V2 Specifications

General

Brand	Lafayette
Model	EZ-Charge V2
Category	Remote Control
Language	English

Summary

EZ-Charge V2 Multi-Channel Remote Overview

FCC Compliance

Details compliance with FCC Rules, including conditions for operation.

Package Contents

Lists all items included in the remote package.

Remote Installation

Instructions for installing the wall mount holder and battery.

Remote Programming

Steps to pair a motor, check direction, and set limits.

Advanced Remote Settings

Covers adjusting limits, copying, deleting channels, and factory reset.

Motor Sleep and Favorite Position

How to put the motor to sleep and set a favorite position.

Tilt Mode and Motor Speed

Details on Tilt Mode operation and adjusting motor speed settings.

EZ-Charge V2 Surface Mounted Wireless Wall Switch Overview

FCC Compliance

States compliance with FCC Rules and operational conditions.

Package Contents

Lists the items included with the wall switch.

Wall Switch Installation

Guides for mounting the switch and installing the battery.

Wall Switch Programming

Procedure for pairing the wall switch with a motor, checking direction, and setting limits.

Advanced Wall Switch Settings

Instructions for adjusting limits and managing channels.

Motor Sleep and Favorite Position

How to put the motor to sleep and set a favorite position.

Tilt Mode and Motor Speed

Details on Tilt Mode operation and adjusting motor speed settings.