To Next PageTo Next Page
Need help?Do you have a question about the LAFOMED Autoclave LFSS03AA and is the answer not in the manual?
Details the manual's applicability and initial reading recommendations.
Highlights critical safety measures, warnings, and symbol meanings.
Outlines immediate actions to take during an emergency situation.
Defines manufacturer's responsibilities and liability limitations.
Warns about device suitability, liquid sterilization risks, and chloride ion effects.
Classifies the product and specifies its intended purpose for medical instruments.
Lists the main components that constitute the sterilizer.
Explains the sterilization principle, factors, and operational parameters.
Diagram identifying numbered components of the sterilizer.
Details chamber/autoclave parameters, and environmental requirements for use.
Specifies ambient conditions for moving and storing the equipment.
Details physical size, weight, power needs, and environmental setup conditions.
Defines minimum space around the device and table specifications for installation.
Guidance on safe handling, lifting, and unpacking procedures, including dangers.
Precautions for lifting, avoiding door/foot pad damage, and improper orientation.
Instructions for leveling feet, connecting drain, and plugging in with grounding emphasis.
Advice on pre-operation warming after storage in low temperatures.
Procedures for atmospheric pressure, date/time settings, and leak testing.
Guides on confirming sterilization parameters using indicator tests.
Details program parameters, load suitability, maximum load, and water consumption.
Explains general keys, home page elements, and interface icons.
Guides on selecting programs and entering the settings menu.
Details setting language, units, date/time, preheating, and drying parameters.
Allows adjustment of drying times and enables password protection for operation.
Describes the running interface elements and explains various operational prompt messages.
Covers preparation, water/drain connections, and instrument loading guidelines.
Instructions for closing the door, selecting programs, and key operational safety warnings.
Details how to run, interrupt, open the door, and safely remove sterilized items.
Covers record management, special door opening, and extended non-use handling.
Lists error codes, causes, and solutions for temperature and sensor-related issues.
Details troubleshooting for errors related to heating, pressure, door locks, and drains.
Covers troubleshooting for vacuum issues and negative pressure persistence.
Highlights safety measures and outlines regular cleaning and inspection schedules.
Instructions for cleaning the sterilization chamber, water tank, drain filter, with cleaning warnings.
Details inspection procedures for door seals, level sensors, and safety valve functionality testing.
Guides on checking water quality, leakage, fuses, and waste water container.
Instructions for replacing the bacteria filter, door seal, and button battery.
Outlines warranty coverage, exclusions, and post-warranty repair options.
Presents a list of optional and standard accessories for the sterilizer.
Lists various inspection items and their corresponding test results.
Provides a sample printout and guidance on understanding sterilization cycle data.
Details the meaning of each stage displayed during a sterilization cycle.
General| Voltage | 220-240 V |
|---|---|
| Chamber Material | Stainless Steel |
| Weight | 45 kg |
| Sterilization Time | 4 min at 134°C |
| Safety Features | Overheat protection, Door lock |
| Sterilization Temperature | 121°C to 134°C |
