EasyManua.ls Logo

Lagrange 509 - Kettle Upkeep and Maintenance; Scale Removal Procedure

Lagrange 509
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
UPKEEP
For cleaning the unit, you should take care to:
*
Always unplug the unit and let it cool down before washing it.
*
Do not put the base, the cord or the plug into water. Do not allow
water to enter the base of the kettle.
*
Clean the kettle and the base with a moist cloth. If the kettle is
very dirty, add a small amount of soap.
*
Do not use scouring pads, steel wool or any form of powerful
solvents or abrasive cleaning products to clean the unit, because they
can damage the exterior surfaces of the unit.
*
Remove the scale lter by pulling it up and clean it using a brush.
Put it back in place once it has been cleaned.
*
IMPORTANT! Let the unit dry completely after cleaning before
using it again. The unit should not be used if the base or the
underside of the kettle is wet.
*
Make sure that the unit is dry and clean before storing it.
SCALE REMOVAL
The presence of scale increases progressively with use.
Once a month, ll you kettle with white vinegar diluted with water
(1/3, 2/3) and leave it cold to react for 2 hours or more.
Rinse several times with tap water.
You can also use scale remover for coffee makers, following the
manufacturer’s instructions.
47
ENG