Need help?Do you have a question about the Laguna Tools Fusion F1 and is the answer not in the manual?
General| Type | Table Saw |
|---|---|
| Blade Diameter | 10 inches |
| Motor Power | 1.75 HP |
| Maximum Depth of Cut at 90 Degrees | 3-1/8 inches |
| Max Cutting Height at 90° | 3-1/8 inches |
| Voltage | 110 V |
| Arbor Size | 5/8 inches |
| Maximum Depth of Cut at 45 Degrees | 2-1/8 in |
| Max Cutting Height at 45° | 2-1/8 in |
Crucial guidelines to prevent personal injury and property damage.
Importance and proper use of safety guards and anti-kickback devices.
Specific safety precautions for various cutting operations.
Explanation of kickback risks and how to avoid them.
Safety precautions for the overall operation of the table saw.
Step-by-step instructions for assembling the saw's base and cabinet.
Procedures for attaching table wings and installing fence rails.
Instructions for aligning the riving knife, blade guard, and splitter.
Procedures to ensure the table, blade, and fence are properly aligned.
Solutions for problems like machine not starting or excessive vibration.
To Next Page
