To Next PageTo Next Page
Need help?Do you have a question about the Laguna Tools MPLAN1510-0120 and is the answer not in the manual?
General| Model | MPLAN1510-0120 |
|---|---|
| Type | Planer |
| Motor Power | 5 HP |
| Voltage | 220V |
| Max Planing Width | 15 inches |
| Max Cutting Height | 6 inches |
| Minimum Cutting Thickness | 1/8 inch |
| Maximum Depth of Cut | 1/8 inch |
| Cutterhead Speed | 5000 RPM |
| Number of Knives | 3 |
| Cutterhead Diameter | 3 inches |
| Max Planing Depth | 1/8 inch |
| Feed Rate | 20 FPM |
Ensures work piece stability to prevent injury during cuts.
Never exceed maximum cutting depth; take smaller cuts.
Always plane with the grain to avoid chatter or chip out.
Always use guards to reduce the risk of injury.
Use good lumber and inspect for metal to prevent damage or fire.
Details on the pre-fitted mobility wheels and how to lock them.
Instructions for attaching the dust chute to the machine.
Check and lubricate anti-kickback teeth for proper function.
Check machine functions after shipping before production use.
Perform a test run to check motor start, stop, and safety features.
Daily inspection and lubrication for optimal performance.
Weekly cleaning and inspection of critical components.
Monthly checks for belts, motor, and drive components.
