3
Safety Rules
As with all machinery there are certain hazards involved with the operation and
use of this machine. Using it with caution will considerably lessen the possibility of
personal injury. However, if normal safety precautions are overlooked or ignored,
personal injury to the operator may result. If you have any questions relative to the
about its installation and operation, do not use the equipment until you have
contacted your supplyi
ng distributor.
Read carefully before operating the machine.
1. Keep the working area clean and be sure adequate lighting is available.
2. Do not wear loose clothing, gloves, bracelets, necklaces or ornaments.
3. Wear face, eye, respiratory and body protection devices as indicated for the
operation or environment.
4. Be sure that the power is disconnected from the machine before tools are
serviced or an attachment is to be fitted or
removed.
5. Never leave the machine with the power on.
6. Do not use dull, gummy or cracked cutting tools.
7. Be sure that the keys and adjusting wrenches have been removed and all the
nuts and bolts are secured.
To Next Page
Loading...