Need help?Do you have a question about the laguna SmartShop II SUV and is the answer not in the manual?
Defines the primary operational screen and its core components.
Describes buttons for tool management, origin setting, and program execution.
Shows selected program, active tool, feed rate, and spindle speed.
Displays machine, relative, ZPO coordinates, and CNC monitor.
Explains controls for manual axis movement (Jog Type, Speed, Step Size).
Buttons for maintenance, dust hood, and tool length/ZPO teaching.
Settings for jog type, speed, step, and tool touch sensor input.
Accessing the screen for adjusting overrides.
Adjusting Rapid Feed rate, Cutting feed rate, and spindle RPM.
Manual Data Input for code execution and control block usage.
Canceling programs and accessing advanced technician settings.
Pre-runs G-code for X/Y graphical representation and estimated time.
User, Programs, and USB tabs for managing controller programs.
File operations like Rename, Copy, Cut, Paste, Delete, Refresh, Multiselect.
Selecting tools and entering/adjusting length, diameter, and wear.
Procedures for automatic and manual tool length measurement.
Field for manual adjustment of the active tool physically in the spindle.
Button to test G-code by pre-running it within machine limits.
Using keys to perform quick code edits on the machine.
Manages calibration, tool changer locations, and machine limits.
Options to import/save settings from/to USB for backup or replication.
Toggling units and accessing advanced technician settings.
IP address settings for controller networking.
Used for file transfers and remote diagnostic functions via PC.
Displays CNC, System, and Machine alarms.
Displays alarms specific to X, Y1, Y2, and Z axes.
General| Brand | laguna |
|---|---|
| Model | SmartShop II SUV |
| Category | Industrial Equipment |
| Language | English |
To Next Page
