Lahoux Optics Spotter 35

Need help?

Do you have a question about the Lahoux Optics Spotter 35 and is the answer not in the manual?

Summary

Introduction and Remarks

Safety Precautions

Operational Warnings

Button Functions

Switch On

Press the power button for 3 seconds to turn on the camera. Indicator light and start-up screen will appear.

Switch Off

Press the power button for 3 seconds when the camera is on to switch it off. Release when countdown reaches zero.

Standby Mode

Short press power button to enter standby mode (blinking indicator). Short press again to resume.

Dioptre Adjustment

Adjust the dioptre knob for the clearest image, focusing on start-up screen, symbols, or menu.

Image Mode Switching

Cycle through 5 image modes: White hot, Black hot, Red hot, Pseudo colour, and Bird mode.

E-Zoom Function

Digitally zoom the image 1x, 2x, or 4x by short pressing the E-zoom button.

Photo and Video Recording

Short press Photo button for photos, long press for video. Long press again to stop and save.

Hot Spot Tracking

Simultaneously press Image Mode and Photo buttons to track hottest objects on display.

Rangefinder Operation

Toggle rangefinder with E-zoom and Image Mode buttons. Adjust lines to target size for distance indication.

Menus and Settings

Main Menu Features

Access settings like Ultra clear mode, WiFi, screen brightness, video out, image calibration, and PiP.

Secondary Menu Options

Configure Digital compass, Motion sensor, Auto standby, Motion calibration, System information, and Factory reset.

Charging Procedure

Charge the device using USB power adapter or power bank. LED indicates charging status.

Data Download

Transfer files to PC/tablet via USB-C cable. The device appears as an external disk.

Technical Specifications

Customer Support