AUTOMATIC ARM BLOOD PRESSURE MONITOR
indicate a high blood pressure status. It is suggested to refer to a physician.
CORRECT MEASURING METHOD
Many factors determine variations in arterial pressure: physical
exercise, eating, agitation, changes in temperature and emotional
stress.
Daily fluctuations of 25 / 50 mmHg are common.
In order to get an accurate blood pressure reading, follow the instructions
below:
1) Sitonachair,relaxandtrytokeepstillforatleast5/10minutesbefore
takingareading.
2) Removeclothingandjewelleryfromthearmorwristbeforeapplyingthe
armlet.
3) Avoideating,smokinganddrinking(especiallyalcohol)beforetakingthe
measurement. All these factors will affect the result of the measurement.
4) Rest the arm on the table so that the armlet is on a level with the heart. The
armmustbestretchedoutnaturallyandmustbekeptstill.
5) Place both feet on the ground.
6) Remember that the blood pressure changes during the day.
Try to effect more measurements during the day for better
understanding the reactions of your body to the different
moments of your day (after a physical activity, during the job,
after the meals…).
7) Do not take only one measurement. At least two measurements
should be taken, wait at least 10/15 minutes between the two
measurements.
More measurements, taken over a long period of time will give
you a better indication of your blood pressure.
8) Should an unpleasant feeling occur during the measurement, stop
immediately the device with the “O/I” button.
IMPORTANT NOTE!
• Thearmletmustbekeptonalevelwiththeheartatalltimes,
otherwise you will not get an accurate reading.
• Topreventtheriskofaccidentalstrangulation,keepthisunitout
of children’s reach and avoid wrapping the armlet around the
neck.
• Thisunitisdesignedtomeasureadultpressurevaluestobe
used for people of 18 years and over (arm circumference roughly
in the range 22 to 30 cm). If this instrument is applied to the arm
of a child, the value measured may be inaccurate. Consult your
doctor for measuring the arterial pressure of a child.
• Werecommendusingtheleftarmfortakingthemeasurements.
• Iftheapplianceisusedintemperatureandhumidityconditions
outside the limits given in the “Technical Features” the readings
may not be accurate.
• Donotusethedeviceincaseofarmwoundsorlesions.
INSERTING/REPLACING BATTERIES
1) Slide the battery cover in the direction of the arrow.
2) When installing or replacing the two batteries, insert them in accordance
withthepolaritymarked.
3) Placethecoverbacktoitsposition.Atthispoint,proceedwiththesetting
of date and time, as shown in the paragraph “Date/time setting”.When the
GB
English
24