Need help?Do you have a question about the Lake LM 44 and is the answer not in the manual?
General| Brand | Lake |
|---|---|
| Model | LM 44 |
| Category | Computer Hardware |
| Language | English |
Lists CE and ETL certifications, and applied standards for the device.
Defines symbols like lightning bolt (dangerous voltages) and exclamation point (important instructions).
Covers general precautions like water exposure, ventilation, and power cord protection.
Details cautions on removing covers, user responsibilities, and amplifier output hazards.
Highlights hazards like speaker damage from overpowering and maintenance like dust filter cleaning.
Explains EMC compliance and user actions for radio interference.
Provides a welcome message and an overview of the product's benefits.
Summarizes the main features of the LM Series devices.
Details seamless integration into Lake Processing environment via Controller software.
Describes integration with third-party real-time analyzers for measurement and EQ.
Explains Dante digital audio networking for simplified system configuration and low latency.
Guides users on locating further detailed information and manuals.
Instructions for carefully opening the shipping carton and checking for damage.
Details on proper mounting in a rack, ensuring adequate airflow.
Explains the forced-air cooling system and operational temperature warnings.
Specifies universal power supply range and AC power connection requirements.
Describes Iso-Float ground isolation and earthing connections.
Details the front panel layout, LCD display, and primary controls.
Explains the functions of the Exit and Dynamic Function Buttons, including their LED indicators.
Describes the Rotary Encoder, I/O Divider, and Mute Buttons/LED Meters for monitoring and adjustment.
Details the analog, AES/EBU, and network connections on the rear panel.
Explains primary/secondary network connectors, GPIO, and mains power connection.
Illustrates audio signal paths in Contour and Mesa modes, explaining signal chain points.
Describes control via Controller software and front panel for crossovers, EQ, dynamics.
Explains the concept of Frames and Modules in Contour and Mesa configurations.
Details controlling multiple modules across frames simultaneously for system configuration.
Overview of loudspeaker processing module types in Contour mode.
Overview of processing modules and functions available in Mesa mode.
Procedure for reconfiguring the device between Contour and Mesa modes.
Methods for storing and recalling module, frame, or system-wide data.
Details Module, System, and Sub-System configuration files.
Explains storing and recalling up to 100 Frame Presets on the device.
Provides an introduction to the tutorial and system architecture overview.
Guides on downloading and installing the LAKE Controller software.
Details how to download and install software updates and firmware.
Information on setting up the Ethernet network for control and audio.
A tutorial for configuring a typical loudspeaker system using the LM 26 and Controller.
Explains gain adjustments at various points in the signal path.
Setting input headroom relative to analog audio source output level.
Details settings for input mixer and module input gain adjustments.
Explains output gain settings and optimizing levels for volume and noise.
Ensuring sufficient headroom to avoid clipping and engage limiters.
Using digital inputs and appropriate headroom for optimal noise ratio.
Details the 3-year limited warranty and conditions for nullification.
Provides information on obtaining technical assistance and locating service centers.
Contacting dealers or distributors for service information.
Instructions and requirements for sending products for factory service.
To Next Page
