Lakeland Mills CFU232 User Manual

Lists and illustrates the various wooden parts required for picnic table assembly, including table boards, legs, braces, and rails.

Details the types and quantities of hardware, such as bolts, washers, nuts, and lag screws, needed for the picnic table.

Guides on positioning table boards with center holes and inserting initial bolts, ensuring correct orientation.

Instructions for placing table cleats onto carriage bolts and securing them with washers and nuts.

Instructions to place the table top on a clean, dry surface for subsequent assembly steps.

Details on inserting bolts through table cleats and attaching legs using washers and nuts.

Guidance on connecting bench rails to the table structure using specific bolts, nuts, and washers.

Instructions for attaching leg braces using lag screws after flipping the table onto its legs.

Describes how to affix the main table brace to the tabletop using bolts, nuts, and washers.

Details on attaching bench boards to the frame and connecting them to bench rails with bolts and lag screws.

Final instructions to tighten all fasteners and ensure the table is stable and ready for use.