Lalizas Safelite IV User Manual

Lifejacket light assembly instructions on ISO & SOLAS lifejackets
Αpplicable for:
Product 72349
Step 1:
Put the black clip underneath the
fabric which holds the whistle.
Step 2:
Place the light at an angle and press
it down so that the two pieces lock
together.
Step 3:
Check that the light has been
placed as in the above picture
and that it cannot be removed
from the fabric by pulling it.
72349
LALIZAS Lifejacket LED Flashing light “Safelite IV”
ON-OFF water activated, USCG, SOLAS/MED
72348
LALIZAS Lifejacket LED ashing light
“Alkalite II” ON-OFF water activated, L.S.A. Code
The assembly steps are the same for product 72348.
Instructions
DELTA: (71108, 71109, 71201)
OMEGA: (71103, 71105)
ZETA: (72399, 72400)
SIGMA: (71094, 71096, 71097, 72081, 720811, 72154,
72560, 725601, 72561, 725611, 73580, 73581, 73650)
ALPHA:
(71098, 71100, 71101, 71102)
FOR LIFEJACKETS:
LAMDA: (73584, 73629, 71107, 71216, 72114, 72115)
www.lalizas.com
LALIZAS

Lalizas Safelite IV Specifications

General

Brand	Lalizas
Model	Safelite IV
Category	Flashlight
Language	English

Summary

Lifejacket Light Assembly Instructions

Product Identification

Identifies LALIZAS LED flashing lights Safelite IV (72349) and Alkalite II (72348) for lifejackets.

Lifejacket Compatibility

Lists lifejacket models (SIGMA, LAMDA, ALPHA, DELTA, OMEGA, ZETA) compatible with the lifejacket lights.

General Assembly Steps

Provides step-by-step instructions for assembling the lifejacket light onto the lifejacket.

Additional Lifejacket Compatibility and Assembly

More Compatible Lifejackets

Lists additional lifejacket models (KAPPA, THETA, VITA) compatible with the lifejacket lights.

Assembly for Elastic Clip Attachment

Details the assembly steps for attaching the light using an elastic clip mechanism.

Assembly for Black Clip Attachment

Details the assembly steps for attaching the light using a black clip mechanism.