Lamax Electronics LAMAX C9 - Page 4

- 3 -
d) Press the MENU button to return to the previous screen.
5) Recording / Taking Photos / Viewing the Gallery
a) To begin recording, press the OK button. Press again to stop recording. Camera must be in
video recording mode.
b) Auto-record – the auto-record function is always on. Auto-recording begins when the camera
is turned on. If the car’s power supply is ignition dependant, the camera turns on and begins
recording after car ignition.
c) Auto-stop record and shutdown – the camera automatically stops recording and turns o
when the power is interrupted, i.e. when the engine is turned o. In some cars, the cigarette
lighter is continuously powered. In this case, be sure to unplug the power cable from the
cigarette lighter.
d) Press the OK button to take a photo. The camera must be in photo mode.
e) When you switch to gallery mode, a list of recorded videos and photos is displayed. Use the
UP and DOWN arrows to move between individual recordings and photos. To start and stop
a recording, press the OK button.
6) Deleting Entries Directly on the Camera
Deleting individual entries can be done directly on the camera – this can be done in the gallery.
Select the le you want to delete. Press the MENU button and two options are given: “Delete
this entry” or “Delete all entries”. Select the option using the arrow keys and conrm with the OK
button. Use the arrow keys to select “Yes” or “No” and conrm again with OK.
7) Connecting to a PC
The camera can be connected to a PC using the included mini USB cable. Once connected, the
camera acts as a plug‘n‘play device.
8) GPS Player
LAMAX C9 camera oers you smart and useful software. On a single screen it allows you to view
your footage, the route on map, the speed chart and the g-forces obtained from the came-
ra’s internal G-sensor. Download the GPS player installation le at www.lamax-electronics.com,
under LAMAX C9 » download