What to do if my Lamborghini Caloreclima RUBINO PLUS Air Conditioner does not start?
If your Lamborghini Caloreclima Air Conditioner doesn't start when you press the ON/OFF button on the remote, first ensure the power cord is securely plugged into the mains socket and that the socket has voltage. If it still fails to start, wait 3 minutes before attempting to restart it.
Why is my Lamborghini Caloreclima RUBINO PLUS running but not cooling?
If your Lamborghini Caloreclima Air Conditioner is running but not cooling, it might be due to a refrigerant shortage or a potential solenoid valve failure. In this case, it is recommended to call service.
What to do if the compressor in my Lamborghini Caloreclima Air Conditioner operates for short periods?
If the compressor in your Lamborghini Caloreclima Air Conditioner runs for short periods and then stops, it could be due to a partial refrigerant charge or a dirty outdoor unit heat exchanger. It is recommended to call service and clean the outdoor unit heat exchanger.
What to do if indoor unit works, but outdoor unit is off in Lamborghini Caloreclima Air Conditioner?
If the indoor unit of your Lamborghini Caloreclima Air Conditioner is working, but the outdoor unit remains off, it may indicate that the outdoor unit is not powered. In this case, it is recommended to call service.
General| Brand | Lamborghini Caloreclima |
|---|---|
| Model | RUBINO PLUS |
| Category | Air Conditioner |
| Language | English |
Check received items and transport damage.
Purpose, usage, and maintenance advice for proper operation.
Unit types (Mono/Multi-Split) and refrigerant details.
Compliance with EU directives and safety standards.
Detailed explanation of remote control buttons and their functions.
Covers ON/OFF, Transmission, Mode, and Timer displays.
Displays icons for various functions like FOLLOW ME, SLEEP, and system status.
Instructions for correct remote control usage and handling.
Steps for inserting or replacing batteries in the remote.
How to turn the air conditioner on using the remote.
Explanation of selecting operating modes (AUTO, COOL, DRY, HEAT, FAN).
Energy saving mode with ECO and GEAR options.
Activates sleep mode for temperature adjustment over time.
Uses remote sensor for temperature control.
Functions for hygiene and noise reduction, like Self-Clean and Silence.
Functions for rapid operation and airflow control.
8°C Heat and Key Lock functions for protection and control.
Lists error codes, descriptions, and notes for unit failures.
Shows compatibility between different unit settings.
How to activate and use the automatic mode.
Explains how AUTO mode selects cooling, heating, and fan.
How to adjust the flap for airflow direction.
Steps to set the automatic start time.
Steps to set the automatic switch-off time.
Example of setting the auto-on timer.
Example of setting the auto-off timer.
Example of combined auto-on and auto-off timer setting.
Displays the current temperature setpoint.
Displays error codes when a fault occurs.
Shows ON for timer or active functions.
Shows OF for timer or inactive functions.
Displays 'dF' during defrost cycle.
Displays 'CL' for battery drying cycle.
Shows Wi-Fi symbol for wireless connection.
Displays 'EL0C' for refrigerant leak detection.
Displays 'FP' for frost protection.
Displays 'CL' or 'nF' for filter maintenance reminders.
Instructions for using the manual button for AUTO/COOL modes.
Automatic restart after power failure and flap position memory.
How to properly turn off and shut down the unit.
Steps for checking and cleaning air filters.
Instructions for cleaning the indoor unit.
Guidelines for cleaning the outdoor unit.
General safety and environmental considerations.
Table of common issues, causes, and solutions for service.
Regulations for safe installation, operation, and maintenance.
To Next Page
