To Next PageTo Next Page
Need help?Do you have a question about the Lamello Classic X and is the answer not in the manual?
General| Power | 780 W |
|---|---|
| Voltage | 230 V |
| Speed | 10, 000 rpm |
| Blade Diameter | 100 mm |
| Cutting Depth | 20 mm |
| Type | Biscuit Joiner |
| Power Input | 780 W |
| Cutter | Carbide tipped cutter |
Guide to selecting lamellas based on size and material thickness for strong joints.
Instructions for cutting grooves for corner joints, including baseplate positioning.
Read all safety warnings and instructions to prevent hazards. Keep for future reference.
Product conformity with specified standards and normative documents.
Unplug before use, check plug/cable, verify voltage, use RCD.
Wear dust mask, use correctly rated cutters, always use guard.
Double insulation, no motor housing drilling to maintain safety.
Use only sharp tools and cutters rated for manual feed.
Step-by-step guide for replacing the cutter, from unplugging to final checks.
Repairs to the grooving machine may only be carried out by the manufacturer.
Exploded view diagram of Top 21 spare parts, numbered 1 to 26.
Detailed list of spare parts for Top 21 with part numbers, descriptions, and art. numbers.
Exploded view diagram of Classic X spare parts, numbered 1 to 25.
Detailed list of spare parts for Classic X with part numbers, descriptions, and art. numbers.
