EasyManua.ls Logo

LAMINOX Idro TERMOBOILER Mini Series User Manual

LAMINOX Idro TERMOBOILER Mini Series
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
INSTRUCTIONS FOR INSTALLATION, USE
AND MAINTENANCE
PELLET BOILER
Mini
Read instructions carefully before installation, use and maintenance
The instruction manual is an integral part of the product.
Laminox S.r.l. reserves the right to change the characteristics and data reported in the following
document at any time and without warning in order to improve their products. This manual,
therefore, cannot be considered as a contract with third parties.
Updated manuals and drawings are available at website www.laminox.com.
Question and Answer IconNeed help?

Do you have a question about the LAMINOX Idro TERMOBOILER Mini Series and is the answer not in the manual?

LAMINOX Idro TERMOBOILER Mini Series Specifications

General IconGeneral
BrandLAMINOX
ModelIdro TERMOBOILER Mini Series
CategoryBoiler
LanguageEnglish

Summary

General Standards

Fireplace or Chimney Flue Requirements

Requirements for the vertical duct for outside release of combustion fumes and chimney flue specifications.

Preventing House Fires

Safety precautions to prevent fires during installation and use.

Specifications and Technical Data

Wiring Diagram

Schematic representation of the boiler's electrical wiring.

Installation Guidelines

General Installation Notes

General guidelines for boiler installation, system compatibility, and room ventilation.

Minimum Safety Distances

Mandatory distances from flammable materials and structures for safe installation.

Fume Exhaust Duct Installation

Guidelines for the construction and installation of the fume exhaust duct system.

Assembly and Connection

Hydraulic Connection

Procedures for connecting the boiler to the hydraulic heating system.

Using the Termoboiler

First Ignition Procedure

Procedure and precautions for the initial start-up and calibration of the boiler.

Ignition and Normal Operation

Detailed steps for boiler start-up, ignition phases, and normal operation.

Safety Devices and Alarms

Overview of Safety Devices

Overview of safety devices integrated into the boiler for safe operation.

General Alarms List

List of general alarms, their causes, and display messages.

Specific Alarm Procedures

Detailed procedures for addressing specific alarm conditions like Black-out, Smoke sensor, etc.

Warnings and Maintenance

Routine and Special Maintenance

Schedule and procedures for yearly routine and special maintenance by a Technical Support Centre.