33
Exclusive to Howdens
Problem Reason Solution
Detergent residue in the
detergent drawer. (**)
Detergent is put in wet drawer. Dry the detergent drawer before putting in
detergent.
Detergent has gotten damp. Keep detergents closed in an environment free
of humidity and do not expose them to excessive
temperatures.
Water pressure is low. Check the water pressure.
The detergent in the main wash compartment got
wet while taking in the prewash water. Holes of the
detergent compartment are blocked.
Check the holes and clean if they are clogged.
There is a problem with the detergent drawer
valves.
Call the Authorised LAMONA Service Agent.
Detergent might be mixed with the softener. Do not mix the softener with detergent. Wash and
clean the dispenser with hot water.
Regular drum cleaning is not applied. Clean the drum regularly.
Too much foam forms in the
machine. (**)
Improper detergents for the washing machine are
used.
Use detergents appropriate for the washing
machine.
Excessive amount of detergent is used. Use only sufficient amount of detergent.
Detergent was stored under improper conditions. Store detergent in a closed and dry location. Do
not store in excessively hot places.
Some meshed laundry such as tulle may foam too
much because of their texture.
Use smaller amounts of detergent for this type of
item.
Detergent is put in the wrong compartment. Put the detergent in the correct compartment.
Softener is being taken early. There may be problem in the valves or in the
detergent dispenser. Call the Authorised LAMONA
Service Agent.
Foam is overflowing from the
detergent drawer.
Using an in-wash treatment which is reacting with
the detergent being used.
Mix 1 tablespoonful softener and / L water and
pour into the main wash compartment of the
detergent drawer.
Put detergent into the machine suitable for the
programmes and maximum loads indicated in the
“Programme and consumption tables”.
When you use additional chemicals (stain
removers, bleaches and etc), reduce the amount
of detergent.
Laundry remains wet at the end
of the programme. (*)
Excessive foam might have occurred and
automatic foam absorption system might have
been activated due to too much detergent usage.
Use recommended amount of detergent.
(*) Machine does not switch to spinning step when the laundry is not evenly distributed in the drum to prevent any damage to the machine
and to its surrounding environment. Laundry should be rearranged and re-spun.
(**) Regular drum cleaning is not applied. Clean the drum regularly.
CAUTION: If you cannot eliminate the problem although you follow the instructions in this section, consult your dealer or the
Authorised LAMONA Service Agent. Never try to repair a non-functional product yourself.
Problem solving (continued)
To Next Page
Loading...
