Need help?Do you have a question about the Lampa AMPEROMATIC-PRO and is the answer not in the manual?
Read this manual carefully before using the battery charger and keep for future reference.
Charger is suitable for GEL, AGM, LiFePO4 batteries (12V/12Ah to 12V/120Ah).
Step-by-step guide for connecting, selecting battery type, and initiating the charging process.
Explanation of LED indicators for power, charge status, and battery capacity levels.
Details on continuous charging, stopping the mode, and proper disconnection after charging.
Interpretation of simultaneous or alternating indicator blinking for faults or over-charge.
How to use the device to check battery charge percentage without connecting to power.
Instructions for activating and stopping the desulfation mode, and its limitations.
Essential safety measures including environment, clothing, and handling of the charger.
Information on flammable gas produced during charging and the need for ventilation.
Ensuring correct input and proper connection to prevent short circuits and damage.
Avoiding flames and sparks in the charging area due to potential hydrogen gas.
Warning against charging non-compatible battery types to prevent explosions.
Procedures for stopping charging if the battery leaks or overheats, and keeping a safe distance.
Warning about the corrosive nature of electrolytes and immediate first aid for contact.
General| Brand | Lampa |
|---|---|
| Model | AMPEROMATIC-PRO |
| Category | Battery Charger |
| Language | English |
To Next Page