The device needs all 3 Male molexs to be
connected to PSU for proper functionality and
safety, do not run the product without attaching
all 3 connections properly first to ensure safe
function.
Recommended to use with 600w or higher power
supply to ensure proper functionality and safety.
WARNING:
FC9 instruction manual
Dimension 148.5mm*42.5mm*75mm
Power Output
Up to 50 Watts per Channel
DC Input +12V(standard 4-pin connector)
DC Output 0V-12V DC
Control Channels 4
LED Color Available White,Blue,Green,Cyan,Red,Purple,Yellow
Face Plate Color Available Black Anodized/Silver Aluminum
Stop with the knob controllers! The Lamptron FC9 is here with 50w of pure power control per channel without the knob-
s! One of the highest wattage controllers we ever released! Smooth throttle control over 4 channels for a new control exp-
erience! Up to 7 different colors of choice for LED lights!
Four adjustable channels, up to 50 Watts per channel,throttle control operation
Connect the fans
G
R
B
C/O
connect to the
power supply
Use the mini jumper
to select LED color
Put jumper in c/o for side lights,
remove jumper to remove side
lights
color
Mount the product into a 5.25inch drive bay of your
computer chassis using the screws in the accessory bag
Need help?
General
