To Next PageTo Next PageWhat to do if my Lanaform Breezy Cube is not working?
If your Lanaform Air Conditioner isn't working, first ensure the USB connector is securely attached and that the device is properly connected to a working power outlet. Check for any power faults. Make sure you are using the mains adapter supplied with the device. If the issue persists, try using another USB cable (type B USB micro).
Why is my Lanaform Breezy Cube overflowing?
Your Lanaform Air Conditioner might be overflowing due to several reasons. Ensure the cooler tank drain plug is tightly closed. Place the device on a horizontal, stable, flat surface, especially if it contains water. If the reservoir is cracked or damaged, contact your supplier’s after-sales service.
Why is my Lanaform Breezy Cube not cooling down enough?
If your Lanaform Air Conditioner isn't cooling down sufficiently, consider that the device cools through evaporation, which depends on ambient conditions. Wait a few minutes for evaporation to start. Ensure the reservoir is filled with water. Check if the relative humidity is too high or the ambient temperature is too low.
General| Fan Speed | 3 speeds |
|---|---|
| Oscillation | Yes |
| Remote Control | Yes |
| Power Consumption | 65 W |
| Voltage | 220-240V |
| Type | Portable Air Cooler |
| Water Tank Capacity | 4.5 L |
| Features | LED lighting |
