Lanaform Visage+ - Cleaning and Storage; Maintenance and Replacement

7
Visage+
J. Application from the middle of the nose to the
edge of the eye.
4. CLEANING AND STORAGE:
• Clean the rubber tip after each usage. Use a dry cloth to wipe o any residues of
cream.
• Always use a damp cloth to clean the appliance; do not use alcohol, acetone,
abrasive products etc.
Cleaning the  lter:
Step 1: Remove the rubber tip.
Step 2: Remove the  lter protection (small white cover) with tweezers, and turn
the appliance over to obtain the small metallic  lter in your hand. Rinse and
clean both.
Step 3: Dry with a towel and place them back in the appliance.
1 Filter protection; 2 Filter
Note:
Be careful not to mislay the  lter and its cover while cleaning
them because they are small parts.
Retain the product storage box for future usage.
5. MAINTENANCE AND REPLACEMENT:
If the suction force decreases and is not adequate for use, replace the batteries.
In addition, weak suction force can be caused by a clogged  lter. Clean the  lter
before using the appliance again.
EN