Lanberg RO Series - User Manual

Need help?

Do you have a question about the Lanberg RO Series and is the answer not in the manual?

Summary

Product Compliance and Safety

Health and Environmental Compliance

Details EU compliance and explains WEEE, RoHS, and CE symbols for product safety.

Router Hardware Overview

Understanding Router LEDs

Router Buttons and Features

Router Setup and Reset

Factory Reset Procedure

Provides step-by-step instructions to restore the router to its default factory settings.

Initial Router Connection and Device Setup

Connecting and Powering On the Router

Guides on the physical connection and initial power-up of the broadband router.

Wireless and Internet Connection Setup

Establishing a Wireless Connection

Step-by-step guide to connect devices to the router's Wi-Fi network.

WAN Connection Modes Configuration

DHCP WAN Connection Setup

Instructions for configuring the router to connect via DHCP.

Static IP WAN Connection Setup

Guides on setting up a static IP address for the WAN interface.

WAN Connection Modes Configuration (Continued)

PPPoE WAN Connection Setup

Details the configuration steps for a PPPoE internet connection.

PPTP VPN Client Mode Setup

Advanced Router Operation Modes

L2 TP VPN Client Mode Setup

Router Mode Configuration

Access Point (AP) Mode Configuration

Additional Router Operation Modes

Repeater Mode Configuration

Wireless ISP (WISP) Mode Configuration

Wi-Fi and Client Mode Configuration

Client Mode Setup

Wi-Fi Configuration for Router;AP Modes

Connecting to Target Wireless Networks

Wi-Fi Connection to Target Network