Lancaster Water Treatment X FACTOR LX15 Series User Manual

PAGE 1
F I L T E R
™
Congratulations on purchasing your new Lancaster Water Filter. This unit is designed to give you
many years of trouble free service. For servicing and future inspection purposes, please le this
booklet with your important documents.
In the event that you need assistance for servicing your water softener, please rst contact the
professional contractor who installed the system.
ELECTRONIC WATER SOFTENER WITH
THE X-FACTOR CONTROL VALVE
COMMERCIAL SERIES
LX15, LX2 & LX2QC
INSTALLATION, OPERATING AND
SERVICE MANUAL

Lancaster Water Treatment X FACTOR LX15 Series Specifications

General

Brand	Lancaster Water Treatment
Model	X FACTOR LX15 Series
Category	Water Dispenser
Language	English

Summary

Inspection, Mineral Loading and Assembly

Loading and Assembling the Mineral Tank

Step-by-step guide for filling the mineral tank with gravel and mineral.

Pre-Installation Review

General Installation and Service Warnings

Bypass Valve Operation

Normal Operation

Water flows through the control valve during service.

Bypass Operation

Control valve is isolated from water pressure.

Diagnostic Operation

Water pressure is allowed to the control valve and system.

Installation Instructions

Control Valve Dimensions

Single System Installation Diagram

Twin Parallel System Installation Diagram

Placing Filter into Service

General Operation

User Displays

Describes the various screens and information shown on the control panel display.

Setting Time of Day

Adjusting Regeneration Schedule

Low Battery Indicator

Contact Screen Programming

General Specifications

Front Cover and Drive Assembly Components

LX15 Series Control Valve Parts

LX2 Series Control Valve Parts

LX2QC Series Control Valve Parts

LX2QC Series Valve Base Assemblies

LX15 Series Injector Valve Body Parts

LX2 & LX2QC Series Injector Valve Body Parts

Drain Line Flow Controls

PVC Elbow, 0.7-10 GPM

Details for PVC elbow type drain line flow controls.

Inline Plastic, 9 - 25 GPM

Details for inline plastic type drain line flow controls.

MxF Stainless Steel, 9-85 GPM

Details for MxF stainless steel type drain line flow controls.

Drain Line Flow Control Washers

Servicing Drain Line Flow Control

Disassembly and Inspection

Steps for taking apart and checking drain line flow controls.

Reassembly

Steps for putting drain line flow controls back together.

Optional Meter Assembly

Service Instructions

Drive Assembly

Instructions for disassembling and inspecting the drive assembly.

Drive Cap Assembly

Instructions for disassembling and inspecting drive cap assembly for 1.5" and 2" valves.

Main Piston and Regenerant Piston

Procedures for disassembling, inspecting, and reassembling pistons.

Spacer Stack Assembly

Procedures for disassembling, inspecting, and reassembling the spacer stack.

Troubleshooting