EasyManua.ls Logo

Lancaster Clear-Flo Haloshield 7-LWT-UV410-009 User Manual

Default Icon
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
PAGE 1
INSTALLATION, OPERATING AND SERVICE MANUAL
Lancaster Clear-Flo
HAL SHIELD
OLD
NEW
ULTRAVIOLET DISINFECTION SYSTEM
7-LW T-UV410-009
PLEASE CAREFULLY READ INSTRUCTIONS BEFORE INSTALLING SYSTEM
FOLLOW ALL STATE AND LOCAL CODES AND REGULATIONS FOR PLUMBING AND ELECTRICAL.
INSTALLATION BY A CERTIFIED PLUMBER IS RECOMMENDED.
In the event that you need assistance for servicing your UV system, please rst contact the
professional contractor who installed the system.
Congratulations on purchasing your new Lancaster Water UV Disinfection System. This unit is
designed to give you many years of trouble free service. For servicing and future inspection purposes,
please le this booklet with your important documents.
Question and Answer IconNeed help?

Do you have a question about the Lancaster Clear-Flo Haloshield 7-LWT-UV410-009 and is the answer not in the manual?

Lancaster Clear-Flo Haloshield 7-LWT-UV410-009 Specifications

General IconGeneral
CategoryWater System
ModelClear-Flo Haloshield
Model Number7-LWT-UV410-009
Product TypeUV Water Disinfection System
BrandLancaster
SeriesHaloshield
Flow Rate7 GPM
Wattage40W
Voltage120V
Housing MaterialStainless Steel

Summary

Safety Instructions

DANGER

Critical safety warnings regarding potential injury or death from electric shock and improper grounding.

WARNING

Safety warnings concerning potential scalding from hot water and UV radiation exposure.

Safety Precautions

CAUTION

Safety warnings for minor or moderate injury risks and careful system examination after installation.

NOTICE

Important notices on lamp life, system usage, extension cords, and electrical circuit requirements.

Water Chemistry Requirements

Product Overview and Components

Assembly Instructions

System Dimensions and Weight

System Specifications

Installing your UV Disinfection System

Installation Safety CAUTION

Safety precautions for installing the UV disinfection system, emphasizing GFCI receptacle use.

Installation Procedure

Disinfection Procedure

Maintenance Instructions

UV Lamp Replacement

Instructions for replacing the UV lamp to ensure adequate disinfection, including safety warnings.

Quartz Sleeve Replacement and Cleaning

Steps for cleaning or replacing the quartz sleeve to maintain UV transmittance and system performance.

Filter Cartridge Replacement

Electronic Ballast Operation

Troubleshooting Guide