To Next PageTo Next PageWhy is my Land Pride RTA2562 bumping on the ground?
If your Land Pride Tiller is bumping on the ground, it might be because: * Obstacles are entangled in the tines and/or rotor, so clear the rotor and/or tines. * The tines are not installed correctly, so install them correctly.
Why do tines behind tractor tires on Land Pride Tiller wear faster?
Increased wear on tines operating behind tractor tires on your Land Pride Tiller can occur because tractor tires can compact the soil, so it is considered as normal wear. You can replace worn tines.
General| Brand | Land Pride |
|---|---|
| Model | RTA2562 |
| Category | Tiller |
| Language | English |
Contact details for the dealership.
Warning regarding cancer and reproductive harm.
General advice for safe operation and accident prevention.
Explanation of hazard alert symbols and their meaning.
Guidelines to keep children safe around the equipment.
Proper procedures for shutting down and storing the tractor.
Proper use of safety chains for towed implements.
Safe practices for transporting the tiller.
Precautions for safe tire maintenance and changing.
Guidelines for performing maintenance safely.
Steps for emergency preparedness.
Recommended protective gear for safe operation.
Warnings and precautions for hydraulic systems.
Importance of seat belts and roll-over protection.
Precautions for handling silica dust exposure.
Safe handling procedures for chemicals.
Safety steps before digging to avoid utility lines.
Information on locating and maintaining safety labels.
Location and importance of the serial number.
Contact information for support and questions.
Tasks for dealers before customer delivery.
Specifies referring to torque chart for bolt tightening.
Horsepower and hitch type requirements for the tractor.
Step-by-step guide for safely shutting down the tractor.
Instructions for assembling the tiller's park stand.
Steps for assembling the hitch and guards.
Procedures for installing the driveline.
Specifics for installing the coil spring slip clutch driveline.
Specifics for installing the Belleville spring slip clutch driveline.
Steps for connecting the tiller to the tractor's hitch.
Detailed instructions for connecting the driveline.
Procedure to check minimum driveline length.
Procedure to check driveline's collapsible length.
Procedure to measure maximum driveline length.
Procedure to check for driveline interference.
Information on the optional down pressure kit.
Pre-operation checks for the tiller.
Procedures for inspecting the tiller before use.
Specific safety warnings related to operation.
Safe procedures for transporting the tiller.
Steps to safely detach the tiller from the tractor.
Important notes before starting tiller operations.
Detailed guidance for operating the tiller.
Reference for bolt torque values.
How to adjust the drive chain tension.
Procedure for adjusting skid shoes for depth control.
Adjusting the rear deflector for soil texture.
How to adjust the hitch for an offset position.
General advice on maintaining the tiller.
Inspection and maintenance of the roller chain and sprockets.
Instructions for replacing worn or damaged tines.
Checks and maintenance for the driveline.
Explanation of slip clutch protection.
Maintenance for coil spring slip clutches.
Procedure for running in slip clutches.
Inspection of clutch components.
Steps for assembling the slip clutch.
Steps for disassembling the slip clutch.
Maintenance for Belleville spring slip clutches.
Procedures for disassembling and assembling slip clutches.
Guidelines for storing the tiller long-term.
Information on how to order replacement parts.
Locations requiring lubrication.
Lubrication of driveline U-joints.
Lubrication of driveline shield bearings.
Lubrication of driveline profiles.
Lubrication of the rotor shaft bearing.
Checking and filling chaincase oil.
Checking and filling gearbox oil for RTA25 series.
Checking and filling gearbox oil for RTA35 series.
