Lander Hawker Hunter - Assembling the Aircraft

- 5 -
DROP TANKS & ROCKET TUBES
Remarks: 1) Operational Manual (included)
2) 5 Min. epoxy set (included)
3) Extension cord x 1& Y cord x 4 (included except ARF version)
4) Push rods for Elevator, Rudder, Aileron, and Retract Gear & Steering (included)
5) One plastic bag includes screws, Control Horns, Linkage Stoppers & Retract Landing Gear.
Assembling the aircraft
01
1) Install the nose gear plate with the epoxy
or hot melt glue on the front lower
fuselage.
2)Tight the nose retrace gear on the gear
bay with 2.6mm screw X 4 pcs.
02
1) Link up the related push rods with nose
gear and steering.