• ADDING SAND TO THE BOTTOM OF
FIREBOWL HELPS PROTECT AGAINST
THE CORROSIVE NATURE OF THE ASHES
AND WILL EXTEND THE LIFE OF
THE FIREBOWL.
• IF YOU ARE NOT GOING TO USE THE
BALL 'O FIRE FOR A LONG PERIOD
OF TIME, STORE AWAY OUT OF THE
WEATHER OR USE THE COVER TO KEEP
DRY.
• DO NOT LET FIREBOWL FILL WITH
WATER.
• DO NOT DUMP ASHES WHERE THEY
COULD START A FIRE.
• DISPOSE OF ASHES IN PROPER
RECEPTACLE ONLY AFTER ASHES HAVE
COOLED.
HELPFUL HINTS
STEP 10
Assemble the fixed
screen sections
[E,F,G] to the center
ring using (2) M6 x
13 bolts and hexnuts.
Tighten securely.
BALL 'O FIRE
™
ASSEMBLY INSTRUCTIONS:
STEP 12
Assemble door
screen section
[H,J,K] to the pivot
pins as shown.
Squeeze the ends of
the door together if
necessary and insert
into the pins.
Assemble the door
with (2) M6 x 40
bolts, lock washers
and M6 hexnuts.
Assemble as shown.
Place the firebowl on
the inside and onto
the M6 x 25 bolts.
The Ball 'O Fire is
ready for use.
Enjoy!
STEP 11
Assemble the bowl
handles [N] to the
bowl [O] using (4)
M6 hexnuts.
Tighten securely.
PAGE 4
IF YOU HAVE QUESTIONS OR
TROUBLE WITH ASSEMBLY,
PLEASE CALL 1-877-347-4557
FOR ASSISTANCE.
WARNING!
!
DO NOT USE WITHOUT FIREBOWL,
THE FIREBOWL MUST BE USED AT
ALL TIMES. KEEP FIREWOOD
WITHIN THE BOUNDARIES OF THE
FIREBOWL. DO NOT PILE WOOD ON
ANY SCREEN PART. FIREWOOD
MUST NOT BE ALLOWED TO TOUCH
ANY PART OF THE SCREEN. FOR
LONGER PRODUCT LIFE, KEEP
FIRES TO A RESPECTABLE SIZE,
DO NOT OVERLOAD.
M6 hexnut
M6 x 13 bolt
M6 x 40 bolt
M6 hexnut
Lock washer
To Previous Page
Loading...
