Why are my Landoll Weatherproofer III 2310 disc blades loose and/or shearing roll pins?
The gang may not be tightened properly. Retighten gang shafts to 1200-1500 ft-lbs. If gangs have ran loose, gangs may require disassembly to remove soil to properly torque gang shafts. Replace any worn components, shafts/spools, etc.
General| Model | Weatherproofer III 2310 Series |
|---|---|
| Category | Farm Equipment |
| Manufacturer | Landoll |
| Disc Diameter | 24 in |
| Hitch Type | Pull-Type |
| Depth Control | Hydraulic |
| Disc Spacing | 9 in |
| Shank Spacing | Not Applicable |
| Frame Construction | Heavy-Duty Steel |
| Number of Shanks | Not Applicable |
Explains the meaning of various safety alert symbols and statements used in the manual.
Highlights critical safety warnings and precautions necessary before and during assembly procedures.
Details the steps for assembling the main frame halves of the Weatherproofer III.
Instructions for assembling the wing extensions specific to models 2310-7-30 and 2310-8-30.
Guides the user through the process of installing the wheel lift system components.
Provides instructions for attaching the hitch assembly to the main frame.
Details the installation of the depth stop tube assembly for depth control.
Covers the assembly and adjustment of the disc gangs and related depth control components.
Instructions for installing the auto-reset shank and shovel assemblies.
Explains how to assemble the depth gauge mechanism for the disc gangs.
Details the routing and connection of hydraulic hoses and components for various functions.
Guides the installation of the lighting system, including brake lights and warning lights.
Final steps to complete assembly, including attaching tractor and verifying systems.
Instructions for installing the standard rear jack assembly for stability.
To Next Page
