To Next PageTo Next Page
Need help?Do you have a question about the L&W Compressors LW 100 E1 ECO and is the answer not in the manual?
General product details, drive motors, scope of delivery, technical data, unit assembly, and flow charts.
Covers intended use, personnel, on-unit, general, operational, maintenance, and transport safety.
Procedures for different models, dimensions, clearances, ventilation, and electrical setup.
Key operating instructions, first commissioning, daily checks, filling, and shutdown procedures.
Lists parts for overall view, console, fan guard, intake filter, and compressor block assemblies.
Details parts for crankshaft, pistons (1st, 2nd, 3rd stages), and inlet/outlet valves.
Covers parts for cooling fan, electric motors, 4-stroke motors, water separators, and filter housings.
Lists parts for safety valves, filling hoses, cross design valves, and filling valve brackets.
Describes the function and availability of an additional hose for filling two bottles simultaneously.
Explains the operation of the switch-over device for selecting 200 or 300 bar pressure.
Details the automatic system for draining condensate from separators.
Describes the automatic shut-down function based on final pressure and hour counter.
Information on available special motors and voltage/frequency configurations for LW 100 models.
Instructions for safe operation, mounting, and maintenance of the safety valve.
Declaration of conformity with EC directives for machinery and pressure equipment.
General| Free Air Delivery | 100 L/min |
|---|---|
| Motor power | 2.2 kW |
| Weight | 50 kg |
| Power | 2.2 kW |
| Voltage | 230V/400V |
