Laney LV300 - Sample Setup Guide (LV300 H)

LZB1 23 4
www.laney.co.uk
The total impedance of the cabinet/s must not be less than 4 Ohms.
Connecting cabinets that have a lower impedance than 4 Ohms will result in the amplifier
overheating and may cause permanent damage.
Permitted configurations could be 1x4 Ohm, 1x8 Ohm, 2x8 Ohm, or 2x16 Ohm cabinets.
FX Controller
300H
17
~115V
~220V/~230V