Parameter settings
Pressing together with at the same time, will enter the instrument parameter
setting interface.
First of all we can see P00, then press by turns, we can find P01, P02, P03, P04, P05,
P06, P07, P08, P09
P00:
Wheel diameter setting
P01: Under-voltage setting
P02: Nu
mber of pole pairs setting
P03: Speed signal selection setting
P04: Km / Mile selection setting
P05: Non-zero start and zero start selection
settings
P06: Cruise and non-cruise selection
settings
P07: Soft start and hard start selection settings
P08: Speed limit adjustment in percentage
P09: EBS brake strength adjustment
To Next Page
Loading...