Need help?Do you have a question about the Lanta Aurora 1000 and is the answer not in the manual?
Details on the first of seven in-built lighting effects and its sub-modes.
Selecting static colour mixes within the In-built Program Mode.
Setting individual RGB channel intensities in P.01 mode.
Adjusting speed and flash frequency for various operating modes.
Details on the auto run mode where all built-in colour mixes loop continuously.
Operating the unit in synchronization with a master unit.
Information on controlling the unit via DMX desks, including address and mode selection.
General| Pan Movement | 540° |
|---|---|
| Tilt Movement | 270° |
| Color Wheel | 7 colors + white |
| Power Consumption | 150W |
| Power | 150W |
| IP Rating | IP20 |
| Type | Moving Head |
| Light Source | LED |
| Gobo Wheel | 7 gobos + open |
| Prism | 3-facet |
| Control | DMX512 |
| DMX Channels | 16 |
| Power Supply | AC 100-240V, 50/60Hz |
| Voltage | AC100-240V, 50/60Hz |
| Lifespan | 50000 hours |
To Next Page
