Lantronix EDS2100 Command Reference

5: Commands and Levels
EDS1100/2100 Command Reference 58
lpd <line>
Enters the configure lpd level.
<line> = number of the line (lpd serial port) to be configured.
modbus
Changes to the modbus configuration level.
query port
Enters the query port level.
rss
Change to menu level for RSS configuration and status
show
Displays system information.
show history
Displays the last 20 commands entered during the current CLI
session.
smtp
Changes to the command level for SMTP configuration and status.
snmp
Enters the snmp level.
syslog
Enters the syslog level.
tcp
Changes to the command level for TCP configuration and status.
terminal <line>
Enters the configure-terminal level.
<line> = number of the terminal line (serial port) to be configured.
terminal network
Enters the configure-terminal level for the network.
tftp
Enters the tftp level.
udp
Changes to the command level for UDP configuration and status.
vip
Change to menu level for VIP configuration and status
write
Stores the current configuration in permanent memory.
connect (tunnel-connect:2) level commands
block network disable
Forwards (tunnels) network data in connect mode tunneling.
block network enable
Discards all data coming in from the connect mode tunnel before
forwarding
it to the serial interface (generally used for debugging).
block serial disable
Forwards (tunnels) serial data in connect mode tunneling.
block serial enable
Discards all data coming in from the serial interface before
forwarding
it to the connect mode tunnel (generally used for debugging).
clrscrn
Clears the screen.
connect mode always
Enables the tunneling server to always establish tunneling
connections.
connect mode any character
Enables the tunneling server to establish a tunneling connection
when a
character is received on the corresponding line (serial port).
connect mode disable
Disables connect mode tunneling.
connect mode modem control
asserted
Enables the tunneling server to make tunneling connections when
the modem
control pin is asserted.
connect mode modem emulation
Enables modem emulation for connect mode tunneling.
connect mode start character
Enables connect mode tunneling when the configured start
character
is received on the line.
default connect mode
Restores the default connect mode as "disable".
default host mode
Connects to the first host in the list that accepts the connection.
default local port
Uses a random port number as the local port for establishing
tunneling

Lantronix EDS2100 Specifications

General

Brand	Lantronix
Model	EDS2100
Category	Server
Language	English