Lantronix SGX 5150 Command Reference

5: Commands and Levels
SGX™ 5150 IoT Device Gateway Command Reference 113
field of the email alert.
send
Sends an email using the current settings.
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the current CLI session.
show log
Displays the email log.
show statistics
Displays email statistics.
subject <text>
Sets the Subject for email alerts. <text> = text to placed as the subject.
to <text>
Sets To addresses for email alerts. <text> = a quoted, semicolon separated list of email
addresses.
write
Stores the current configuration in permanent memory.
email 9 (email:9) level commands
auto show statistics
Continuously displays email statistics.
cc <text>
Sets Cc addresses for email alerts. <text> = a quoted, semicolon separated list of email
addresses.
clear log
Clears all entries from the mail log.
clear mail counters
Sets the email counters to zero.
clrscrn
Clears the screen.
default priority
Sets X-Priority for email alerts to 3 (normal).
email <number>
Enters the configure email level.
exit
Exits to the enable level.
message file <text>
Specifies a text file, the contents of which will be the message body of an email alert.
<text> = the name of a local file.
no cc
Removes the Cc addresses for email alerts.
no clear mail counters
Restores the email counters to the aggregate values.
no message file
Removes the file name, so the message body will be empty.
no reply to
Removes the Reply To address for email alerts.
no subject
Removes subject used for email alerts.
no to
Removes the To addresses for email alerts.
priority high
Sets X-Priority for email alerts to 2 (high).
priority low
Sets X-Priority for email alerts to 4 (low).
priority normal
Sets X-Priority for email alerts to 3 (normal).
priority urgent
Sets X-Priority for email alerts to 1 (urgent).
priority very low
Sets X-Priority for email alerts to 5 (very low).
reply to <text>
Sets the Reply To address for email alerts. <text> = email address to place in the Reply To
field of the email alert.
send
Sends an email using the current settings.
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the current CLI session.
show log
Displays the email log.
show statistics
Displays email statistics.
subject <text>
Sets the Subject for email alerts. <text> = text to placed as the subject.
to <text>
Sets To addresses for email alerts. <text> = a quoted, semicolon separated list of email
addresses.
write
Stores the current configuration in permanent memory.
enable (enable) level commands
auto show interfaces
Show interface statistics

Lantronix SGX 5150 Specifications

General

Certification	FCC ICES-003:2012 RED 2014/53/EU, EMCD 2014/30/EU, EN 300 328 V1.9.1, EN 301 489-1 V1.9.2, EN301 489-17 V2.2.1, EN 301 893 V1.8.1, EN 62311: 2008 AS/NZS CISPR 22, AS/NZS 4268: A1: 2013, AS/NZS 2772.2VCCI EN 55022:2010, EN 55024:2010, EN 61000-3-2:A2 2009, EN 61000-3-3: 2008 UL 60950/CSA 22.2 No. 60950, IEC 60950 CE LVD 2014/35/EU
LED indicators	Yes
Power requirements	9 - 30 VDC
Power over Ethernet (PoE)	No
Power consumption (typical)	1.9 W
Storage temperature (T-T)	-40 - 85 °C
Operating temperature (T-T)	-40 - 70 °C
Operating relative humidity (H-H)	5 - 95 %
Security algorithms	802.1x RADIUS, AES, EAP-FAST, EAP-PEAP, EAP-TLS, EAP-TTLS, FIPS 140-2, MSCHAPv2, TKIP, WPA, WPA2, WPA2-PSK, WPS
Authentication method	RADIUS
Ethernet LAN (RJ-45) ports	1
Supported protocols	IPv4/IPv6, TCP, UDP, ICMP, ARP, Auto-IP, DNS, (S)FTP
Frequency band	2.4 / 5 GHz
Cabling technology	10/100BASE-T(X)
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11d, IEEE 802.11g, IEEE 802.11h, IEEE 802.11i, IEEE 802.11n, IEEE 802.1x, IEEE 802.3, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u
Ethernet LAN data rates	10, 100 Mbit/s

Weight and Dimensions

Weight	350 g
Dimensions (WxDxH)	110 x 89 x 26 mm