5: Commands and Levels
SGX™ 5150 IoT Device Gateway Command Reference 319
Sets the action to ACCEPT.
Restores the default value of action (ACCEPT).
Exits to the config-gateway level.
mac address <hexadec-
imal>
Sets the filter MAC Address. Each byte is represented by two adjacent hex digits. Bytes
may run together or be separated by optional punctuation: 123ABC "12 3A BC" 12,3A,BC
12.3a.bc 12:3a:bc Note that quotes must enclose the value if it contains spaces.
mac address filter <num-
ber>
Change to config mac filter level.
Removes the filter MAC Address.
Displays the current configuration.
Displays the last 20 commands entered during the current CLI session.
Stores the current configuration in permanent memory.
mac address filter 6 (config-mac_filter:6) level commands
Sets the action to ACCEPT.
Restores the default value of action (ACCEPT).
Exits to the config-gateway level.
mac address <hexadec-
imal>
Sets the filter MAC Address. Each byte is represented by two adjacent hex digits. Bytes
may run together or be separated by optional punctuation: 123ABC "12 3A BC" 12,3A,BC
12.3a.bc 12:3a:bc Note that quotes must enclose the value if it contains spaces.
mac address filter <num-
ber>
Change to config mac filter level.
Removes the filter MAC Address.
Displays the current configuration.
Displays the last 20 commands entered during the current CLI session.
Stores the current configuration in permanent memory.
mac address filter 7 (config-mac_filter:7) level commands
Sets the action to ACCEPT.
Restores the default value of action (ACCEPT).
Exits to the config-gateway level.
mac address <hexadec-
imal>
Sets the filter MAC Address. Each byte is represented by two adjacent hex digits. Bytes
may run together or be separated by optional punctuation: 123ABC "12 3A BC" 12,3A,BC
12.3a.bc 12:3a:bc Note that quotes must enclose the value if it contains spaces.
mac address filter <num-
ber>
Change to config mac filter level.
Removes the filter MAC Address.
Displays the current configuration.
Displays the last 20 commands entered during the current CLI session.
Stores the current configuration in permanent memory.
mac address filter 8 (config-mac_filter:8) level commands
Sets the action to ACCEPT.